51.14€

Piegādes laiks no noliktavas:

4 - 10 darba dienas

Iesaki Alphacool AGB Repack Dual Bayres Rev,2 (45250)

Alphacool AGB Repack Dual Bayres Rev,2  (45250) Alphacool AGB Repack Dual Bayres Rev,2  (45250) Alphacool AGB Repack Dual Bayres Rev,2  (45250) Alphacool AGB Repack Dual Bayres Rev,2  (45250) Alphacool AGB Repack Dual Bayres Rev,2  (45250) Alphacool AGB Repack Dual Bayres Rev,2  (45250) Alphacool AGB Repack Dual Bayres Rev,2  (45250)
The second version of the Alphacool Repack Dual Bayres 5,25" is now available!
Based on the development of the Alphacool Repack Dual 5.25 Bay Station, this Bay reservoir also brings its advantages to the table: Easy mounting, compact dimensions and appealing design! All of these features and many more are implemented in the Alphacool Repack Single Bayres. But Alphacool would not be Alphacool, if this new product would not also have some extremely interesting new features, which were not available until now!
The Alphacool Repack Dual Bayres 5,25" - Rev.2 is designed for installation in the front of an enclosure. Two vacant 5.25” drive bays are needed. By default, the connection of in- and Outlet can be achieved via 1/4” threaded openings. Additionally Alphacool offers the possibility to use 3/8” threads for reduced flow resistance. Of course all four openings can also be used parallel, e.g. to allow installation of a second cooling loop.
New technologies implemented in the Alphacool Repack Dual Bayres:So far everything sounds like a standard reservoir, but the developers have integrated some great features to improve the reservoir and its functionality:
Anti Cyclone:Unlike most reservoirs, where the coolant is sent around multiple corners, still leaving micro-bubbles in the coolant, this reservoir utilizes a new technology: Both In- and Outlet openings are equipped with a special filter which eliminates even the smallest bubbles in the coolant!
Filling:Filling has always been a hassle with standard slot-in reservoirs: Unscrew, pull out, fill, push in and tighten screws again. Enough of this! The front of this reservoir has a filling straw which can be taken out by unscrewing it. As it is hollow, it can now be used for filling of the reservoir. We recommend using a filling bottle or funnel from our portfolio.
Design:The front of the reservoir, the component which mainly remains visible after installation, is just beautiful to look at: Plexi, Acetal and a fill level indicator in combination with the typical Alphacool copper create a truly elegant design. Lighting is the next step towards a perfect system: At the rear of the reservoir, up to six 5mm LEDs can be inserted.Highlight: From the top a 10cm long cold light cathode can be inserted! This is the ultimate lighting source four your reservoir. In combination with the LEDs it is even possible to have different colors inside of the reservoir. Especially with a Heatmaster as a controller, the possibilities are endless!
Modular design:All Alphacool Repack Bayres of the second revision feature a modular design. This means that a standard of this reservoir can be rebuilt to e.g. a pump reservoir. Different pump reservoirs can also be made compatible with other pump types, or be transformed into a standard reservoir. This is possible, as the reservoir is not glued together at the back, but rather screwed together and sealed by a gasket.
More power, better looks, easy handling and high quality: This is truly a First-class reservoir for your system!
Technical specifications:Material: Plexiglas/Acetal, brassColor: Transparent/black/copperConnection threads: 2x 1/4“ and 2x 3/8”Dimensions (L x W x H): 91 x 148 x 84mmPre-drilled holes for 6x 5mm LEDsMount for 10cm CCFL
Conforms with ROHS
Extent of delivery:1x Alphacool Repack Dual Bayres 5,25" - Rev.26x Mounting screws2x 3/8” screw plugsAllen key
Note: The copper-colored logo is covered by a protective foil. To have the logo shining and clean, simply remove this foil.
Note regarding cathodes:We have measured that the cathodes have manufacturing tolerances of up to 0.3mm, even amongst the cathodes in the same package. As the fit of the cathodes is meant to hold them in place, it might be that due to the tolerances the cathodes will not fit at first. The small amount of excess material can easily be removed with a few brushes of sandpaper.
Important Note: Please note that the firm Alphacool International GmbH accepts no liability for damages of this product by using other coolants. We would like to point out that other coolants as inhibitors often contain alcohol or other corrosive substances attack the acetal, please only use our Cape Kelvin Catcher.
Ražotājs
Alphacool
Krāsa
Melns, Varš, Caurspīdīgs
Augstums
8,4 cm
Platums
9,1 cm
Dziļums
148 mm
Materiāls
Acetāls, Misiņš
Ventilators
Radiator
Yes

Mēs iesakām

Ražotājs: Akasa

  Akasa AK-TT300-01 - pad termoprzewodzący - 1.5mm
Top prece
7.91€

Tips: Ventilatori

Ražotājs: be quiet!

Izmēri: 81.5 x 21 x 120 mm

Piemērots: Computer case

  Be quiet! BK009 Pure Rock CPU cooler 775/1150/1155/1156/1366/2011(-3)/754/939/940/AM2+
Top prece
35.44€

Tips: Ventilatori

Ražotājs: Enermax

Piemērots: Computer case

Voltage: 12

Supported processor sockets:

  Enermax Cluster Advance  (UCCLA12P)
Top prece
15.56€

Tips: Ventilatori

Ražotājs: Cooler Master

Izmēri: 90 x 136 x 79 mm

Piemērots: Processor

Supported processor sockets: AM2, AM2+, AM3, AM3+, FM1, Socket 1155, Socket 1156, Ligzda 1366, Ligzda 775

  Cooler Master cooler Hyper TX3 EVO 1366/1156/1155/775/FM1/AM3+/AM3/AM2+/AM2
Top prece
23.00€

Tips: Ventilatori

Ražotājs: Corsair

Piemērots: Computer case

Voltage: 7 - 12

Supported processor sockets:

  Corsair SP120 PWM High Performance Edition (CO-9050013-WW)
Top prece
17.89€

Tips: Ventilatori

Ražotājs: Corsair

Piemērots: Processor

Supported processor sockets: AM2, AM3, FM1, FM2, Socket 1155, Socket 1156, Ligzda 1366, Socket R (2011)

  CORSAIR Water Cooling Hydro Series H75 CW-9060015-WW
Top prece
92.92€

Tips: Ventilatori

Ražotājs: SilentiumPC

Piemērots: Computer case

  SilentiumPC Zephyr 60x60x15mm 18dB SPC012
Top prece
3.31€

Ražotājs: Silverstone

Piemērots: Processor

Voltage: 12

Supported processor sockets: Ligzda AM2, Ligzda AM3, Socket B (LGA 1366), Socket FM1, Socket FM2, Socket H (LGA 1156), Socket H2 (LGA 1155), Socket H3 (LGA 1150), Socket LGA 1151, Socket R (LGA 2011), Socket R (LGA 2011-v3), Socket T (LGA 775)

  SilverStone SST-TD02-Slim Tundra  240mm (SST-TD02-Slim)
Top prece
106.71€

Tips: Ventilatori

Ražotājs: Spire

Piemērots: Computer case

Voltage: 12V

Supported processor sockets:

  Spire case fan ORION 30X10, 30x30x10mm
Top prece
3.06€

Tips: Ventilatori

Ražotājs: Akasa

Izmēri: 120 x 120 x 25 mm

Piemērots: Computer case

  Wentylator 12cm Viper PWM/S-Flow/HDB
Top prece
15.52€

Ražotājs: Revoltec

Izmēri: 140 x 140 x 25 mm

 
6.99€

Ražotājs: Revoltec

 
9.17€

Ražotājs: Noctua

 
9.77€

Tips: Ventilatori

Ražotājs: Enermax

Piemērots: Processor

Voltage: 12

 
35.44€

Tips: Ventilatori

Ražotājs: Cooler Master

Piemērots: Processor

Voltage: 12

Supported processor sockets: Ligzda AM2, Ligzda AM3, Socket AM3+, Socket FM1, Socket FM2, Socket H2 (LGA 1155), Socket H (LGA 1156), Socket B (LGA 1366), Socket T (LGA 775), Socket R (LGA 2011)

 
137.74€

Tips: Ventilatori

Ražotājs: 4World

Piemērots: Computer case

  4World 60mm Fan 07280
7.64€

Tips: Ventilatori

Ražotājs: 4World

Piemērots: Computer case

Voltage: 12 V

  4World Fan 120mm 07283
3.64€

Tips: Ventilatori

Ražotājs: 4World

Piemērots: Computer case

  4World PC case fan 120x120x25mm, 3pin
3.48€

Tips: Ventilatori

Ražotājs: Adaptec

Supported processor sockets:

  Adaptec ACC-7XX5 FAN KIT
30.03€

Tips: Ventilatori

Ražotājs: Adler

  Adler AD 77
15.63€
Meklēt Alphacool AGB Repack Dual Bayres Rev,2 (45250) internetā: Google | Yandex
Atpakaļ uz sarakstu
Pirms komentēšanas autorizējies vai reģistrējies!
x