59.40€

Piegādes laiks no noliktavas:

4 - 10 darba dienas

Iesaki Enermax iVektor.Q Midi-Tower, Czarny, Okno (ECA3371A-BT-BL(U3))

Enermax iVektor.Q Midi-Tower, Czarny, Okno (ECA3371A-BT-BL(U3)) Enermax iVektor.Q Midi-Tower, Czarny, Okno (ECA3371A-BT-BL(U3)) Enermax iVektor.Q Midi-Tower, Czarny, Okno (ECA3371A-BT-BL(U3))
The Enermax iVektor.Q is the new the compact version of the popular iVektor gaming case. The Midi-Tower, with its racing design, is equipped with a LED temperature display for monitoring the internal temperature and is cooled by a 12-cm TB Apollish with patented circular LED light in the front and a 12-cm rear fan with 3-pin connector and the speed of both fans can be controlled by a switch on the front panel. The tinted acrylic side window provides a clear view on powerful hardware configurations. iVektor.Q has three 5.25”, three 3.5” and four 2.5” drive bays. The upper HDD cage is removable, so that more space for graphics cards with extra length is granted (up to max. 390 mm) and the airflow of fresh air can be improved. A 2.5” disk (HDD / SSD) can then be mounted on the bottom of the case. The Extruded side panels facilitate the hidden cable routing behind the mainboard tray and the installation of tower CPU coolers up to 173 millimeters in height. iVektor.Q supports motherboards in ATX and Micro-ATX format (mATX / uATX).
Design- iVektor.Q – Little SpeedsterCompact chassis with racing-inspired design for small gaming systems supporting ATX and micro-ATX mainboards. Black coated interior.- Tinted Acrylic WindowTo attract envious eyes on high-end hardware and stylish systems.
Cooling- Comfortable Cooling SystemOne 12cm LED front fan and one 12cm rear fan included. Upgradable with one additionally 12cm fan in the top.- 3-step Speed ControlRPM control of the integrated 12cm LED front fan and the 12cm rear fan. The speed can be controlled in three steps with a switch in the front of the case.- Temperature DisplayDisplay in the front for additional control of the internal temperature, measured by an internal and versatile sensor.
Compatibility- Multi-GPU SupportSix extension card slots allow for the installation of two or maximum three graphics cards.- Full Gaming PowerRemovable upper 2.5” HDD/SSD cage clears the space for longer high-end graphics cards with up to 390mm length.- Supported Mainboard SizesThe iVektor.Q supports ATX and micro-ATX (mATX/µATX) mainboards. Pre-assembled mainboard spacers for easy installation.
Data Storage Management & Interfaces- SSD ready!Three 2.5” trays inside the upper HDD/SSD cage. One 2.5” HDD/SSD can be installed in the bottom of the case inside the 3.5” HDD cage.- Ultra High-speed Data TransferOne USB 3.0 interfaces on the front panel for a lightning-fast data transfer with up to 5 Gb/sec.- Easy Accessible Front Interfaces1x USB 3.0, 1x USB 2.0 and audio I/O
Installation, Cable Routing & Operation- Extruded Side PanelsMore space for high tower CPU coolers and for a comfortable hidden cable routing behind the mainboard tray due to extruded side panel.- Optimal Dust ProtectionAnti-dust filters behind the mesh front and at the bottom of the case.- Quick and User-friendly System InstallationScrewless quick release fasteners for ODD and HDD, thumb screws for side panels, cut-out for comfortable CPU cooler mounting and pre-assembled mainboard spacers.- Bottom-Mounted PSUComfortable cable routing and optimized cooling performance thanks to bottom-mounted power supply. With anti-vibration rubber pads and cleanable dust filter at the bottom of the case.
Ražotājs
Enermax
Forma
Midi-Tower
Tips
PC
Atbalstāmie mātesplates formas faktori
ATX
Krāsa
Melna
USB 2.0 pieslēgvietu skaits
1
Audio ieeja
Jē.
Audio izeja
Supported hard disk drive sizes
2.5,3.5"
Platums
20,3 cm
Dziļums
45 cm
Augstums
44 cm
Svars
3.5 kg
Iepakojuma platums
22,5 cm
Iepakojuma dziļums
48 cm
Iepakojuma augstums
49,9 сm
Iepakojuma svars (bruto)
4.4 kg
Number of 5.25\" bays
3
3.5\" sektoru skaits
3
Maximum CPU cooler height
16,5 cm
Maximum front fans
1
Front fans diameters supported
120 mm
Rear fans installed
1x 120 mm
Top fans installed
1x 120 mm
Number of internal 3.5" bays
3
Rear fans diameters supported
120 mm
Top fans diameters supported
120 mm
Number of 2.5" bays
4
Front fans installed
1x 120 mm
Maximum rear fans
1
Maximum top fans
1
Rear radiator sizes supported
120 mm
Top radiator sizes supported
120 mm
USB 3.0 (3.1 Gen 1) Type-A ports quantity
1
Uzstādītais radiators (aizmugurējā panelim)
1x 120 mm
Top radiator installed
1x 120 mm
Meklēt Enermax iVektor.Q Midi-Tower, Czarny, Okno (ECA3371A-BT-BL(U3)) internetā: Google | Yandex
Atpakaļ uz sarakstu
Pirms komentēšanas autorizējies vai reģistrējies!
x